• Designed and manufactured by experts
  • Maximum flexibility – Adapt on site to suit your requirements
  • Easy to install with installation instructions, step by step video and dedicated technical team to assist
  • Installation Feet
  • Low profile wet room drain, from only 85mm
  • Level floor access is easily achievable
  • Suitable for large and small tiles
  • Metal drain – no weak areas
  • Water can drain under the tiles if water is present
  • 50mm water seal, preventing odour from coming through the drain and also complies with EN 1253
  • Suitable for use with underfloor heating (ShardBoard recommended to improve heat retention)
  • Removable Tile Insert / Panel for easy cleaning

If you have any questions about any of our UK wetroom products and services, get in touch with our CCL wetrooms team (Customer Care Line)

AptLine is a metal drain with stainless steel panels. The drain is fully adjustable and can be cut onsite to suit your requirements. AptLine Linear comes with a waterproofing gasket and glue to guarantee a strong bond onto the wet room drain body. AptLine Linear has a high capacity of 48 l/min and has a 50mm water seal. The outlet can be turned 360 for easily installation and the outlet can be offset by trimming the drain.  AptLine drain can be easily cleaned by removing the panel and trap. The drain is approved and complies with building regulations for wet room trapped gullies, waste and drains.

We recommend the falls are created using LIP 226 specialist wet room screed which is extremely strong and fibre reinforced, it can work from 2mm thick which is required when screeding to wet room drains and gullies.

All wet rooms need to be waterproofed. The approved membrane for AptLine Linear is LIP VS30 which is an easy to apply paint-on liquid waterproofing membrane. It is designed to stretch and move with your building. The membrane is 100% waterproof and dries as one continuous sheet. Tested to international standards – ETAG 022-1 certified and very low emissions – EC1 Plus approved. We also recommend SharpBoard, which is used to provide the perfect surface to tile onto and for waterproofing walls and floor outside shower.

The installation depth on AptLine Linear can be adjusted onsite to suit your floor requirements from 85mm – 105mm

AptLine® Linear

Unique wetroom drain system which provides ultimate flexibility for the installer. Metal drain and panel finish can be trimmed to size to fit your shower perfectly.   Outlet can offset, height adjusted and is 360° rotational. Option of Polished or Brushed Stainless Steel panel. Suitable for any floor finish.

  • 100% waterproof
  • Drain can be cut onsite to suit your wet room size.
  • Metal Drain Body
  • 2 Sizes Available – 1m – 350mm
  • 360 Degree Outlet
  • High Capacity 48ltr per minute
  • Polished and Brushed Stainless Steel Panels available
  • Suitable for any thickness of floor tile / stone
  • Comes complete with Membrane Gasket and Glue

Our Accreditations & Certifications

What our clients think of us

Luxury wet room systems

For further information please contact us

Get in touch