• 10-Year Guarantee on this wetroom drain kit
  • Easy to install with installation instructions and dedicated CCL – customer care line team to assist
  • Level access is easily achievable
  • 360° rotation outlet for greater flexibility
  • Suitable for large and small tiles
  • Pressed Stainless Steel wet room drain body – no weak areas
  • 50mm water seal, preventing odour from coming through the drain and also complies with EN 1253
  • High capacity drains to ensure water drains efficiently from the walk in shower with no pooling
  • Water can drain under the tiles if water is present
  • Suitable for use with underfloor heating (ShardBoard recommended to improve heat retention)
  • Removable tiled cover for easy cleaning with this wetroom drain kit

SharpDrain 360 is manufactured from stainless steel and has a factory fitted waterproofing membrane to guarantee a strong bond onto the drain body. SharpDrain 360 has a capacity of 51 l/min and can be easily cleaned by removing the tile insert and trap. The drain is approved to comply with building regulations for wet room trapped gullies, waste and drains.

We recommend the falls are created using LIP 226 specialist wet room screed which is extremely strong and fibre reinforced, it can work from 2mm thick which is required when screeding to a wet room drain.

SharpDrain 360 wetroom drain kit has a tile insert allowing you to place your floor tile on top of the drain.

All wet rooms need to be waterproofed. The approved membrane for SharpDrain 360 is LIP VS30 which is an easy to apply paint-on liquid waterproofing membrane. It is designed to stretch and move with your building. The membrane is 100% waterproof and dries as one continuous sheet. Tested to international standards – ETAG 022-1 certified and very low emissions – EC1 Plus approved. We also recommend SharpBoard is used to provide the perfect surface to tile onto and for waterproofing walls and floor outside shower.

If you require a low profile linear wet room drain, SharpDrain Tile Line and SharpDrain Tile Insert & Panel are low profile wet room systems which only require 72mm to install. If you are struggling with floor depth, please contact us with your requirements and we will propose the best solutions.

SharpDrain 360 Wetroom Shower Drain

SharpDrain 360 provides complete flexibility as you can place the wet room drain anywhere away from the wall and has a 360° rotation outlet for easy pipework connection. For easy installation, it comes with support feet which can be adjusted to suit your installation. The drain is manufactured from pressed stainless steel and has a factory fitted membrane for a secure installation. SharpDrain 360 has a tile insert cover which allows you to place a tile on top of the drain.

What's included

What's included

Enlarge image

SharpDrain 360 Wetroom Drain Kit Overview:

  • 100% waterproof and 10 year guarantee
  • 7 sizes available- From 600mm to 1.5m
  • Suitable for any thickness of floor tile / stone
  • Pressed stainless steel wet room drain
  • Outlet can be rotated 360° or vertical option available
  • Factory fitted membrane to seal floor and wall joints

Related products

Our Accreditations & Certifications

What our clients think of us

Luxury wet room systems

For further information please contact us

Get in touch