Unidrain’s award winning wall mounted and freestanding drains can be made to bespoke sizes to suit your wet room. With Unidrain wall mounted you can create a one way slope / fall to the drain against the wall and freestanding provides the flexibility to place the drain anywhere with multiple level access entry points. Our bespoke service allows you to achieve full width drainage running wall to wall or wall to glass. Multiple units can be combined to make larger drains which provides very high capacity drainage even if your project is struggling with low floor depth, the Unidrain low profile outlet is the perfect solution. Unidrain is BBA approved and manufactured from pressed stainless steel.
Unidrain’s wall mounted and freestanding linear drain can be made bespoke to your size. Both drain models have four large flanges to securely waterproof onto. The standard outlet has a capacity of 54l/min per outlet and multiple outlets can be used for projects with high flow rates. The drain can be easily cleaned by removing the grate / tiled cover and trap. The drain is BBA approved to comply with building regulations for wet room trapped gullies, wastes and drains.
Unidrain Bespoke is available in a range of finishes. Highline Custom allows you to tile into the drain and create an invisible drain with no visible metal. There is a collection of Brushed Stainless Steel grates and a range of coloured finishes to match your brassware. The coloured wet room drains are available in Black, Brass, Copper, Brushed and Polished Stainless Steel. To provide the best finish the colours are PVD coated which is a very durable coating that will not tarnish or fade.
We recommend using UniSlope® 1K or 3K system for an easy, fast and safe installation. UniSlope boards are manufactured to be solid so the internal core of the board cannot be crushed UniSlope is suitable for wooden and concrete installations. You can also create the fall using LIP 226 specialist wet room screed which is extremely strong and fibre reinforced, it can work from 2mm thick which is required when screeding to a wet room drain.
All wet rooms need to be waterproofed. The approved membrane for Unidrain is LIP VS30 which is an easy to apply paint-on liquid waterproofing membrane. It is designed to stretch and move with your building. The membrane is 100% waterproof and dries as one continuous sheet. Tested to international standards – ETAG 022-1 certified and very low emissions – EC1 Plus approved. We also recommend SharpBoard is used to provide the perfect surface to tile onto and for waterproofing walls and floor outside shower.
All linear drains are available as low profile which allows you to install a wet room drain with as little as 64mm floor depth. See downloads or contact us for more information.
My client bought a range of Wet Room Unislope Systems from our local retailer, Bathworks. We struggled to find anyone to come to site and take responsibility for the waterproofing until we came across Wet Room Materials. They were willing to stand over their tanking system and more than helpful throughout all stages of the installation from site survey and room preparation to installation. A 10 Year no leak fully insured warranty gave me the confidence that we were dealing with a professional organisation. I would highly recommend these guys and will certainly be using them going forward.
Steven Quinlan | Director | Citius Limited
I have honestly found, Wet Room Materials to be an easy and reliable company to work with. Whether it be a one wet room residential project, apartment block or a gym; they ensure there are no installation problems and we don’t have to worry about leaks. They take care of the specification and advising us on correct build ups and preparation. On a recent project we were able to buy their Unislope System p from our bathroom show room retailer and they subsequently came to site to tank out the bathrooms. It was a time sensitive job and The Wet Room lads worked through the evening and into the weekend to ensure we completed the project on time. I have no hesitation in recommending Wet Room Materials. They are a pleasure to deal with.
Noel Geraghty | Director/Founder | NGS Mechanical Services
In Bright Designs, we understand the importance of specifying a reliable waterproofing system for bathrooms. We have worked on a number of projects with Wet Room Materials over the years and I can honestly say that their waterproofing installation service offers complete peace of mind for us and our clients. The Wet Room Materials Team are there throughout all stages of the project from site survey and specification to installation. More importantly they also give us a 10 year no leak guarantee. I also like the fact that they will handle communication with the client and contractors in terms of delivering a high-quality installation which allows me the head space to focus on other aspects of the build."
Alan Burns | Director/Co-founder | Bright Designs. B Arch, B Sc Arch, MRIAI.